Categories
Archives
- December 2011 (1)
- October 2011 (1)
- September 2011 (1)
- June 2011 (1)
- April 2011 (1)
- February 2011 (1)
- January 2011 (2)
- July 2010 (1)
- January 2010 (2)
- July 2009 (2)
- May 2009 (3)
- April 2009 (2)
- March 2009 (2)
- February 2009 (2)
- January 2009 (1)
- December 2008 (2)
- June 2008 (1)
- April 2008 (1)
- March 2008 (1)
- February 2008 (1)
- January 2008 (2)
- December 2007 (4)
Category Archives: water
SMS generator control with Arduino
Arduino GPRS shield Continue reading
Posted in Off grid power, water
15 Comments
Heating System
Three heating sources will be connected to a central thermal 360L store. The idea behind the store is that it should stay topped up with solar hot water through most of the year, and then provide enough stored heat for … Continue reading
Pumporama
Had some initial problems with the generator, both my chinese-special and a 5kW one we hired. The first couldn’t handle the load, and we kept getting a temperature error on the VFD with the latter. Finally an 8kW generator sorted … Continue reading
Pipe and cable for the well pump
Key: Blue = water pipe = high density pipe suitable for alimentation, 40mm Yellow = Single phase 230V cable = 130m, installer recommends 2x10mm cable. Orange line = 3 phase 230V cable = 191m subsurface (4x6mm) + 110m down the … Continue reading